?

Triflex TowerSafe technical details

Technical details

Triflex TowerSafe

Triflex TowerSafe is a specially developed solution designed to waterproof the entire wind turbine, including the tower, foundation, rotor blades and nacelles.

System build-up

Triflex TowerSafe
1

Primers

Metal Primer

Metal Primers

Primer for metal substrates, also available as spray can.

Overcoat / traffic:
30 minutes using spray can
60 minutes using roller

Consumption
Minimum 0.08 to 0.10 L/m²

TowerSafe Primer

Product Triflex Towersafe Primer 10Kg

Primer for cementitious and other substrates.

Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m² minimum

2

Reinforced waterproofing (single process)

TowerSafe

Product Triflex TowerSafe Summer 15 Kg

Waterproofing resin used with Triflex 110g Reinforcement Fleece and as the optional wearing layer in the Triflex TowerSafe wind turbine waterproofing system.

Overcoat / traffic: 45 minutes
Consumption: 3.00Kg/m² minimum

Product data sheet

110g Reinforcement Fleece

Reinforcement fleece

Polyester fleece used with Triflex resins in Triflex fully and partially reinforced systems.

Triflex TowerSafe resin colours

Resin colours

Triflex TowerSafe is available in 3 standard resin colours.

For an enhanced range of colour choices why not take a look at Triflex TowerSafe with a coloured finish which allows the system to be tailored to meet aesthetic and project needs. Additionally, special colours can be produced to order.

Looking for support?

Your project is our project, that's our motto. If you require any support, have an upcoming project or just a general enquiry then please don't hesitate to get in touch, we're always happy to help.