Details and penetrations which are highly complex and / or difficult to access are common and often impractical to waterproof using traditional materials or fabric reinforced liquid systems.
Triflex ProFibre overcomes these issues by incorporating reinforcing fibres within our unique solvent free resin technology. With ultra-rapid cure times, even at low temperatures, and unsurpassed levels of substrate compatibility, Triflex ProFibre is simple to apply and can be installed all year round for the fast and easy waterproofing of the most complex and tricky details.
Waterproof down to the smallest detail
Triflex ProFibre can be used stand-alone, in combination with other Triflex waterproofing, surfacing and protection systems and in combination with other waterproofing technologies.
Fibre reinforced technology
Triflex lead from the front. Featuring unique fibre reinforced resin technology that allows the quick and effective waterproofing of virtually all highly complex and restricted access details and penetrations.
Cold applied, fast curing with rapid installation
Rapid curing and easy to install, Triflex allows details to be waterproofed seamlessly and quickly with the waterproofing being rainproof in as little as 30 minutes and cured in 45 minutes. Installation can be carried out all year round and Triflex ProFibre still cures quickly at temperatures down to 0°C. There is also no risk from hot works during installation as all Triflex materials are applied in a totally cold liquid form, curing to create a durable solution that lasts.
The system could not be any simpler and easier to apply, just use a brush and any detail will be reliably waterproofed.
The complete solution
Triflex ProFibre is not only a proven stand-alone system but is also used in conjunction with other Triflex systems and other waterproofing technologies to provide a complete waterproofing solution.
Colours and finishes
Triflex ProFibre is available in a range of standard colours or choose from more than 50 optional coloured finishes to create the perfect look - refer to Triflex colour card.
- Small in-situ penetrations
- Small surface mounted penetrations
- Small outlets
- Bolt heads
- Cable penetrations
- Complex details and penetrations where fabric reinforcement is impractical
- Details and penetrations where access is restricted
- Metal roof eaves details
- Single ply membranes
- Cementitious materials (concrete, brickwork, masonry)
- Metals and coated metals
- Coatings (e.g. polyurethane, polyurea, polymethyl methacrylate)
- Solar reflective coatings
Certified to the European standards and classifications, including:
- EN 13501-5: Class BROOF (t1)
- EN 13501-1: Class E
- ISO 9001: Quality Management
- ISO 14001: Environmental Management
- ISO 50001: Energy Management