Triflex Roll Plastic technical details

Technical details

Triflex Roll Plastic

Triflex Roll Plastic is a cold liquid applied, exceptionally fast curing, coloured, anti-skid coating and marking system. The system can be used to add a coloured, anti-skid surfacing finish to external car parking areas, recreational areas, walkways and cycle lanes as well for roller applied line markings on car parks.

  • PTV approx. 68 (TRRL rubber / Slider 55)
  • PTV approx. 62 (Four S rubber / Slider 96)

System build-up



Cryl Primer 222

Triflex Cryl Primer 222

Primer for asphalt, bitumen, timber and other substrates.

Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²

Metal Primer

Metal Primers

Primer for metal substrates, also available as spray can.

Overcoat / traffic:
60 minutes using spray can
60 minutes using roller

Minimum 0.08 to 0.15 L/m²
Product data sheet

Cryl Primer 287

Product Cryl Primer 287 10 kg

Primer for cementitious and other substrates.

Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²

Product data sheet

Than Primer L 1K

Than Primer L 1 K

Single component primer for concrete and cementitous substrates prior to installation of Triflex marking systems.

Drying time: 20 - 30 minutes approx.
Consumption: 0.20Kg/m² minimum.

Product data sheet


Roll Plastic (Rollplastik)

Anti-skid, coloured coating system

Curing time: 15 - 20 minutes
Consumption: 2.00Kg/m² min.

Triflex Roll Plastic


Triflex Roll Plastic is available in a wide range of standard resin colours, allowing the system to be tailored to meet aesthetic and project needs with special colours being produced to order. For full details see the Triflex Roll Plastic colour card below.

Looking for support?

If you require any support, have an upcoming project or just a general enquiry then please don't hesitate to get in touch, we're with you every step of the way.