Triflex ProTect is the ideal solution for inverted roofs as the system is resistant to standing and ponding water. The system can be used with various overburden, with typical build-ups including a geotextile filter fleece, extruded polystyrene (XPS) insulation, a water reducing layer and various overburden including paving and decking (with and without pedestals) and ballast.
System build-up
Primers (if required)
Cryl Primer 222
Primer for asphalt, bitumen, timber and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 276
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Primer 610
Primer for single-ply membranes, liquid coatings and coated metals.
Overcoat / traffic: 20 minutes
Consumption: 0.06L/m² min.
Metal Primer
Primer for metal substrates, also available as spray can.
Overcoat / traffic:
60 minutes using spray can
60 minutes using roller
Glass Primer
Primer for glass substrates.
Overcoat / traffic: 20 minutes
Consumption: 0.05L/m² approx.
Reinforced waterproofing (single process)
ProTect
Waterproofing resin used with Triflex 110g reinforcement.
Overcoat / traffic: 45 minutes
Consumption: 3.00Kg/m²
110g Reinforcement Fleece
Polyester fleece used with Triflex resins in Triflex fully and partially reinforced systems.
Separation layer
Separation layer
Polyester fleece slip layer.
Triflex XPS Insulation
Triflex XPS Insulation
High-performance, multi-purpose polystyrene for the thermal insulation and frost protection of inverted flat roofs, green and blue roofs. An extruded polystyrene (XPS) inverted insulation board with rebated lap for jointing.
Water-flow reducing layer
Water-flow reducing layer
Water resistant, diffusion open, UV stable, rot resistant, synthetic non-woven membrane.
Overburden
Overburden
Overburden including paving and decking (with and without pedestals) and ballast.
Resin colours
Triflex ProTect is available in 5 standard resin colours.