?
Technical details

Triflex ProThan warm roof

Warm roofs are becoming increasingly popular as the requirement to continually increase the thermal performance of buildings grows. Triflex offers a fully integrated, engineered warm roof system suitable for sensitive environment where a low odour waterproof solution is required. The Triflex ProThan warm roof system can incorporate polyisocyanurate (PIR), vacuum insulated panels (VIP), mineral wool and expanded polystyrene (EPS) insulation or combinations of the materials. The build-up is dependent upon the required U-value and condensation risk analysis and in addition to the insulation may include Triflex Spray FastPrime, Triflex Self Adhesive Air and Vapour Control Layer, Triflex Insulation Adhesive and Triflex Self Adhesive Carrier Membrane. For high moisture environments such as swimming pools and textile factories the build-up may additionally include a Triflex Water Resistant Roofing Board.

Suitable for both new build and refurbishment, the completely cold liquid applied Triflex ProThan warm roof system offers an engineered solution comprising all system elements. Triflex offers hydrolysis resistant roofing systems which are resistant to standing water and are suitable for zero pitch and completely flat roofs, and where a cut-to-falls insulation scheme is required, Triflex can provide the design.

System build-up

ProThan warm roof
1

Spray FastPrime (if required)

Spray FastPrime

Spray fast prime

Drying time: Approx. 5 - 10 minutes at 5°C
Consumption: 0.08Kg/m²

2

Vapour control layer (if required)

Air and vapour control layer

Triflex Carrier membrane

Overcoat / traffic: Immediate
Consumption: 1.08m²/m²

3

Insulation Adhesive

Insulation adhesive

Insulation adhesive

Overcoat / traffic: Immediate
Consumption: 0.150 - 0.225L/m²

4

Insulation

Insulation

Insulation

Overcoat / traffic: Immediate
Consumption: 1.00m²/m²

5

Spray FastPrime (if required)

Spray FastPrime

Spray fast prime

Drying time: Approx. 5 - 10 minutes at 5°C
Consumption: 0.08Kg/m²

6

Carrier Membrane

Carrier membrane

Triflex Carrier membrane
7

Reinforced waterproofing (single process)

ProThan

Product ProThan 21Kg

Odourless, solvent free waterproofing resin used with Triflex 110g Reinforcement Fleece and as the optional heavy duty wearing layer and finish in the Triflex ProThan system.

Overcoat / traffic: 12 hours

Consumption
3.00Kg/m²

110g Reinforcement Fleece

Reinforcement fleece

Polyester fleece used with Triflex resins in Triflex fully and partially reinforced systems.

Resin colour

Triflex ProThan is available in 7009 Green grey and 7016 Anthracite grey.

Triflex ProThan resin colours

Looking for support?

If you require any support, have an upcoming project or just a general enquiry then please don't hesitate to get in touch, we're with you every step of the way.