?

Triflex Cold Plastic technical details

Technical details

Triflex Cold Plastic

Triflex Cold Plastic is a cold liquid applied, exceptionally fast curing, heavy duty marking system. Originally designed for highway use, it is also used to add coloured, thick layer, anti-skid markings to car parks, service yards and other heavily trafficked areas.

  • PTV approx. 67 (TRRL rubber / Slider 55)
  • PTV approx. 63 (Four S rubber / Slider 96)

System build-up

Triflex Cold Plastic
1

Primers

Cryl Primer 222

Triflex Cryl Primer 222

Primer for asphalt, bitumen, timber and other substrates.

Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²

Metal Primer

Metal Primers

Primer for metal substrates, also available as spray can.

Overcoat / traffic:
30 minutes using spray can
60 minutes using roller

Consumption
Minimum 0.08 to 0.10 L/m²

Cryl Primer 287

Product Cryl Primer 287 10 kg

Primer for cementitious and other substrates.

Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²

Than Primer L 1K

Than Primer L 1 K

Single component primer for concrete and cementitous substrates prior to installation of Triflex marking systems.

Drying time: 20 - 30 minutes approx.
Consumption: 0.20Kg/m² minimum.

2

Marking

Cold Plastic (Kaltplastik)

Heavy duty marking system.

Curing time: 15 - 20 minutes approx.
Consumption: 4.00Kg/m²

Cold Plastic Colour Card

Colours

Triflex Cold Plastic is available in a wide range of colours, allowing the system to be tailored to meet aesthetic and project needs. Special colours can be produced to order.

Looking for support?

If you require any support, have an upcoming project or just a general enquiry then please don't hesitate to get in touch, we're with you every step of the way.