Stone Design is one of four unique surface finishes available for Triflex ProFloor and features a brilliant combination of either natural granite or Italian marble. The stone finish incorporates a UV-resistant, non-yellowing resin, protecting the system for years to come.
System build-up
Primers
Cryl Primer 222
Primer for asphalt, bitumen, timber and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 276
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 287
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 280 White
Primer for cementitious and other substrates including out gassing substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Waterproof surfacing layer
ProFloor
Waterproof surfacing layer used in Triflex walkway, balcony and terrace systems.
Overcoat / traffic: 1 hour
Consumption: 4.00Kg/m²
Embedment layer
Cryl Finish 205
Overcoat / traffic: 1 hour
Consumption: 0.50Kg/m²
Quartz 0.3 - 0.6mm: 2.00Kg/m² approx.
Finish
Stone Design RS
Two component resin and stone combined to create the surface variant Triflex Stone Design
Overcoat / traffic: 5 hours
Stone Design Resin - 1.10 Kg/m²
Stone Design Stone - 13.00 Kg/m²
Finish options
Triflex ProFloor with Stone Design is available in two stone choices, Italian marble and Granite, and 8 unique colour choices. Allowing the system to be tailored to meet aesthetic and project needs.
2 stone choices
Italian marble available in 5 colours, Giallo Sienna, Breccia pernice, Rosso verona, Marrone and Bardiglio.
Granite available in 3 natural stone colours, Bretagne, Island and Toskana.
Colour finish: Bardiglio
Colour finish: Toskana
